Quick Start

Quick Start2018-05-21T12:00:10+00:00

1) Plug in your video and/or audio cables from the laptop into the source panel on the wall. If you are connecting to a laptop you have two options:

1. VGA/Audio      2.HDMI

source-panel

If you require internet, plug in your network cable OR connect to the LIU wireless network.

2) Turn on the projector by pressing the ON button, located on the control panel (pictured below), and select the source from step 1.

crestron-panel

3) Turn on the connected computer.

For MAC hold command (command-key) and then F1 until your display is mirrored.
For Windows hold the Windows key (windows-key) then P to cycle through the display options. Release the keys once “Duplicate” is selected.

4) Turning off the projector:

Press the OFF button on the control panel to turn off the projector.

Training: Contact your IT department at Ext 3300 or email at: it@liu.edu

If you would like to control the laptop from the projector, plug in a USB cable from the laptop to the source panel. Wired internet access is provided via the data port on the source panel.
Volume can be controlled using the VOL^ or VOLv buttons.
To utilize the system to its full potential, please reach out to ITRC at your local campuses for an in-depth training.